Kyorichi (Henan) Industries Co., Ltd.
Main products:Food Machines,Snacks Production Line,Various Food Production Line,Agricultural Machines,Pet Food Production Line
Contact Us
  • Contact Person : Ms. zhao Angela
  • Company Name : Kyorichi (Henan) Industries Co., Ltd.
  • Tel : 86-0371-63752859
  • Fax : 86-0371-63752859
  • Address : Henan,zhengzhou,B-2307, PuFa International Finance Centre,No.299 Jinshui Road,Zhengzhou,China
  • Country/Region : China
  • Zip : 450008

4-stroke Gasoline Brush Cutter

4-stroke Gasoline Brush Cutter
Product Detailed
4-stroke Gasoline Brush Cutter 1.backpack brush cutter 2.42.5cc brush cutter 3.ISO, EU-2,SGS certificate 4.Strong engine

4-stroke Gasoline Brush Cutter

1, two stroke engine fuel (# 90 above), oil, sae30. the heat engine oil changed rear can normal use. Normal use accumulative total work 30 hours or so replacement of a motor oil. Before and after each use check the oil level.

2, the two stroke engine air for work, the crankcase temperature cannot exceed 90 degrees, overheats stop 15-20 minutes can continue to work. Add gasoline in cold unit shall be. Don't cut grass don't long time use maximum throttle.

3, the gasoline engine stop fast and should be in low speed state stop.

4, oil, want to use correct types, are factory product, clean, gasoline to clean, fresh.

5, non-professional personnel shall not adjust the carburetor.

6, air cleaner filter often should check, change regularly. Dirty filter with soap and water dry cleaning after use.

7, the gasoline engine running 100-300 hours, should remove carbon once. When clearing off of cylinder head, clear the cylinders, of cylinder head, piston, valve adherent carbon. Carbon must not enter the cylinder holes and the valve seat.

8, keep the gasoline engine cylinder especially heat sink clean.

9, come on, inspection, maintenance, repair, want to pull out spark plug hat, don't smoke, away from the fire.

10, not in indoor operation. The machine to work except when the operator, irrelevant personnel leave machine more than 15 meters.

11, the machine before and after each use check working part and other parts of the bolt tightness.

12, have the clutch, in the clutch is not loaded machines exposed before, and may not start the gasoline engine.

Technology data:



Matched engine

1 E40F-3A



Standard power(kw/r/min)


Form of carburetor

Float type

Mixed Fuel ratio


Lank capacity(L)


Working form

Back pack



Diameter of aluminium pipe(mm)


More pictures showing: 

4-stroke Gasoline Brush Cutter

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.